您当前的位置：
纤维的梳棉质量很大程度上取决于梳棉机轮鼓与盖板之间的间隙。调查发现，手动调整不能完全保证梳棉机左右两侧间距一致。为此，采用两到三支电容传感器安装在盖板上，测量到轮鼓的距离。该全自动化测量系统可以减少错误设置以及减少安装时间。
The setting of the distance between the drum and the flat is crucial for carding quality of fibre, e.g.wool. Investigations have shown that manual gap settings with the gauge to the left and right on the carding machine are not equal and that with the machine at standstill slight deviations from the operating conditions arise. The remedy is provided by a measuring flat rod (FCT) with two or three capacitive sensors which is exchanged for a flat rod. The sensors measure the distance to the drum via the drum width. The other distance signals are passed to the PC. The fully automatic measurement sequence eliminates erroneous settings and shortens the setup time. The inspection and documentation of the results facilitates practical quality assurance.
